Turn on voltage for a Mga-4150 and Mga-11000h?

Aero_d2 · #1 05-21-2013, 11:52 AM

I need to know, for the fusing for my relay, if possible. Thanks

If you look at my garage, you can get an idea of my set up..

heavyduty · #2 05-21-2013, 01:38 PM

Quote:

Originally Posted by Aero_d2

I need to know, for the fusing for my relay, if possible. Thanks

If you look at my garage, you can get an idea of my set up..

Fuse size will be based on total amperage draw. However, turn-on voltage is low, like millivolt range low. In this instance a 5 or 10 amp fuse will be more than adequate. Ideally, you want to match the amperage max of the relay with the same fuse size (30 amp relay/30 amp fuse), but again, with turn-on voltage, 5 or 10 amps will be fine.

Aero_d2 · #3 05-22-2013, 11:49 AM

It's also going to power the display on my 3.5 F cap, and 4 led fans, so I wanted to make sure everything gets the proper fusing

Thanks!!

heavyduty · #4 05-22-2013, 03:06 PM

Quote:

Originally Posted by Aero_d2

It's also going to power the display on my 3.5 F cap, and 4 led fans, so I wanted to make sure everything gets the proper fusing

Thanks!!

You got it. Calculate total amperage draw and just make sure you purchase the appropriate relay. Let me know if you need a schematic for the relay.

Aero_d2 · #5 05-27-2013, 03:49 PM

Got it all hooked up, and a pic is in my garage.. All I need to do now, is trim it out

Those components sound killer, off of that amp, btw..