View Single Post
Old 03-02-2009, 05:37 PM
cnadianut's Avatar
cnadianut cnadianut is offline
Just Gettin Started
Join Date: Mar 2009
Posts: 7
Thanks: 1
Thanked 2 Times in 2 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 12
cnadianut is on a distinguished road
Thank You Re: Just got a BTA6200 and have a connection question.

So let me be sure i am correct here. I can just disconnect the lines from my factory subwoofer and connect them directly to the high level input? or did you mean i should tap into one of the door speakers?

Originally Posted by heavyduty View Post
cnadianut, I recommend that you use the High Level Inputs of the Bazooka BTA200 and tap into the speakers on your Edge. The factory subwoofer is removed very easily on the Edge, in fact it is held in place by three bolts. You will then simply disconnect the enclosure. While others may recommend that you purchase a LOC (Line Output Converter) and use the factory amplifier as your Low Level Output, this is simply a waste of money. The Bazooka BTA200's High Level Inputs are Line Output Converters, so why purchase another component you already have and don't need? Secondly, the BTA200 has seperate gain and crossover controls that will allow you to tailor the Tube to what you think sounds best. There would only be one remaining thing I would recommend that you purchase, and that is the RBCM-RS. This will allow you to tune the response whenever you would like from the driver's seat. Just pick a convinent location to mount the unit and fine tune away. Please post back with anymore questions or thoughts you may have.

Below is a link where you can read up on the unit.
Reply With Quote