View Single Post
Old 06-24-2013, 09:42 AM
bobmG8's Avatar
bobmG8 bobmG8 is offline
Just Gettin Started
Join Date: Sep 2010
Posts: 9
Thanks: 2
Thanked 3 Times in 2 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 13
bobmG8 is on a distinguished road
Default New Amp for my Bazooka BT6024DVC Sub

I need a little help from the expert. I am changing my Amp that powers my Bazooka BT6024DVC subwoofer. How would you recommend I set up the Band Pass & Bass EQ Settings? The Amp is the Precision Power PC360.2 ( The sub has a range of 39-1500Hz. There are two setting for selecting the range 50-800Hz and 250Hz to 4kHz (by using a 5X button. Which one is best since the sub spans both selections? Then where do I set the pot for this? The Bass EQ has two Pots 30Hz to 90 Hz and 0dB to 12dB? How you recommend setting these Pots? My speaker Output is 6V so that is how I will set the Gain. The Mode switch is left out for Low Pass and I guess I just leave the HPF alone. Thank you for any assistance you can give me.

Reply With Quote