Thread: Blown amp?
View Single Post
Old 07-16-2008, 03:30 PM
Patentpending's Avatar
Patentpending Patentpending is offline
Just Gettin Started
Join Date: Jul 2008
Posts: 17
Thanks: 0
Thanked 0 Times in 0 Posts
Groans: 0
Groaned at 0 Times in 0 Posts
Reputation: 10
Patentpending is on a distinguished road
Default Re: Blown amp?

OK, I installed everything back into my car. The stuffing is still in the tube, I have it set to auto turn-on, and I bought and ran a 12 foot RCA patch cable(barely long enough) and it works good now. The onl problem now is that my stock speakers seem like they are distorting more than they were before and I am getting a good amount of intereference(not to the sub, to the rear deck speakers), because I have to have a 17 foot wiring harness from the HU to the RCU in the trunk. Unfortunately theres no other way to run it than the way it is, which is that wire harness which has all the speaker cables in it, and the power cable for the amp are running right next to each other. Is there any way I can shield either the power cable or the wire harness to get less interference? I ran the RCA cable on the other side of the car but the RCU and the battery are both on the drivers side so they both have to be run on that side.
Torreador Red 1999 Ford Taurus SE-X
Reply With Quote